How to Clean the Drain Filter on a High-Efficiency Washing Machine

1

Lift the washing machine and place a block of wood or other sturdy item under it to hold the front off the ground. http://bestwashingmachinex.com/ The machine should really be at the least four to six inches off the floor. Do not pinch lines in the back.

2

Remove Washing Machine Guide the three screws on the bottom from the lower panel with the washing machine, using the 1/4-inch socket or hex screwdriver.

3

Remove the metal panel covering the bottom from the front with the machine.

4

Locate the drain filter cover. It is commonly a white plastic cylinder using a bar across the center (kind of like a screw, but the bar is elevated).

5

Place a bucket or pan below the drain filter to catch any water backed up behind the filter.

6

Turn the drain filter cover counterclockwiseHow to Clean the Drain Filter on a High-Efficiency Washing Machine, using the bar across the middle as a deal with. This may take a great deal of strength and it will turn slowly.

7

Pull the cover out slowly, catching the water as it comes out. You can put the cover back on if you need to empty or replace the container pan or bucketHow to Clean the Drain Filter on a High-Efficiency Washing Machine.

8

Pull out the cover and attached plug. Any debris (coins, nails, toys, etc.) that made it out with the washing machine tub might be inside the filter attached.

9

Clean out the filter, removing the hair, lint and debris clogging it. You may prefer to clean the filter itself having a calcium, lime and rust remover to take away any water deposits, or bleach if it has developed a smell.

Removing Rust Stains From a Washing Machine