How to Hook Up Hoses on Maytag Washing Machines

1

Unplug the machine or turn off the power in the main circuit breaker. Move the washing machine away from the wall or any obstructions so you can work in the rear.

2

Wrap the threads on the water supply outlets with plumber's tape. Stretch the tape tightly as you wrap the tape about the threads at least twice. Trim off the excess using the scissors. Do this for both the hot Read More and cold valves.

3

Screw the couplings for the water supply hoses onto every single with the water provide valves. Tighten using the pliers.

4

Wrap http://bestwashingmachinex.com/ the inlets on the Maytag washing machine inside the same manner as you did to the water provide valves with plumber's tape.

5

Connect the hose from the hot water supply for the hot water provide inlet on the Maytag washing machine. The inlet ought to be labeled "HotHow to Hook Up Hoses on Maytag Washing Machines." Do the same thing for the cold water supply.

6

Turn on the water provide valves by rotating the knobs in the top counterclockwise. Move the washer back to its original location. Restore power towards the machine.

7

Run a short load on empty and watch the hoses as the machine fills. Tighten the couplings, if neededHow to Hook Up Hoses on Maytag Washing Machines.

How to Stop Washing Machine Noise