How to produce a Wooden Baby Cradle

1

Find the center point at each and every end in the 2 inch-by-2 inch-by-36 inch lengths of hardwood. Drill a 1-inch deep hole in the center of each and every end of every single piece. Coat inside of hole with 5-minute epoxy. Insert threaded rod into each and every end with the wood.

2

Scribe a 24-inch arc across each and every rocker end from the cradle, parallel with the flat edge baby bedding with the half circle. Drill a 1/4-inch hole 1 inch from the correct and left ends in the arc you just scribed, on each and every half circle. Connect rocker ends towards the two inch-by-2 inch-by-36 inch hardwood lengths, inserting the threaded rods through the holes in the rocker and capping them with brass acorn nuts.

3

Lay the 24 inch-by-36 inch sheet of plywood across the 2 inch-by-2 inch-by-36 inch bottom supports. Screw cradle bottom into place with 1-inch wood screws.

4

Lay cradle sides in placeHow to create a Wooden Baby Cradle, adjusting side placement until the leading edges of the sides will lie flush with the outer edge Top 5 Baby Girl Bedding from the half circle from the rocker. Drill 1/8-inch-diameter pilot holes in each rocker end and within the narrow end of every single cradle side, and attach cradle sides employing 1-inch brass wood screws.

5

Sand and stain cradle. Allow stain to dry overnightHow to make a Wooden Baby Cradle. Coat cradle with two to three layers of clear acrylic deck treatment and allow to dry for several days.

Cowboy Nursery Ideas